Product Description

The plastic drainage board is made of polyethylene (HDPE) as the raw material and the plastic bottom plate is punched into conical projections or stiffening ribs (or hollow cylindrical holes). The plastic drainage board adopts a special process to press the plastic sheet out of the closed and convex cylindrical shell to form a concave-convex film. The shell is continuous, has a three-dimensional space and a certain support height. When the edge is processed and produced, the butyl rubber strip is hot-bonded, and the top of the shell is covered. Geotextile filter layer, used for water seepage, drainage, drainage and water storage products.

Advantage:

1. Greening project: The garage roof greening, roof garden, vertical greening, roof greening, football pitches, and golf course.
2. Municipal engineering: airport, road embankment, subway, tunnel, landfill.
3. Construction: the upper or lower building foundation, inside and outside the basement wall, floor and roof, roof seepage control, and heat insulation layer.
4. Water conservancy project: the reservoir seepage water, reservoir, lake water seepage control.
5. Traffic engineering: highway, railway basement, roadbed, dam, and slope protection layer.
6. New road and renovation project.
7. Asphalt overlay on the old cement concrete road surface.
8. Repair of asphalt pavement cracks and old asphalt roads.
9. To be reinforced layer for the airport runway, and bridge.